E-Spresso Tour 409
|Couleur||matt black (blue)|
|Tailles De Cadre|
|Fourche||SR Suntour NEX-DS, 50 mm|
|Dérailleur Arrière||Shimano Deore|
|Shifters||Shimano Alivio Rapidfire|
|Brakes||Tektro HD-T290 180 mm / Tektro HD-T290 160 mm|
|Manivelle||FSA Metropolis AL-8 ISIS, 17 Z.|
|Carter||Curana H2 open|
|Jantes||MERIDA Comp D|
|Roue Libre||Shimano CS-HG-400 9s, 11-34 Z.|
|Pneus||Schwalbe Energizer Life Active Line 40-622|
|Potence||MERIDA Comp 17|
|Guidon||MERIDA Riser OS, 640 mm|
|Tige De Selle||X-Mission Comp 31.6 mm|
|Selle||MERIDA Cross Trekking|
|Carrier||Racktime Foldit Fix|
|Fender||Curana H2, 55 mm|
|Light Front||Trelock Bike-i uno 20 Lux, 6V DC|
|Light Rear||Trelock duo flat, 6V DC|
|Kickstand||Procraft Kick II|
|Lock||Abus Amparo 4850 LH-4 NKR|
|Motor||Bosch Performance Line|
|Battery||Bosch PowerPack Std. 400Wh|
|TAILLES DE CADRE||46cm||50cm||54cm|
|Head Tube Angle||71||71||71.5|
|Seat Tube Angle||73||73||73|
|Bottom Bracket Drop||70||70||70|
|Head Tube Length||140||160||180|
|Stand Over Height||707||694||687|
The best of two worlds: externally shaped head tube with bigger diameter at the bottom and weight saving smaller diameter at the top. ‘X-Taper Headtubes’ always come with tapered forks or correct adapters fitted. Result: superb stiffness and precise steering even in the toughest conditions without increasing the weight of the frame unnecessarily.
Elaborately shaped frame designs with special inlets and outlets for internally routed brake and/or shifter cables. “Clean” in a double sense: The bike looks uncluttered while the cables are protected effectively from moisture and dirt.
Besides top functionality, MERIDA frames also have to offer a convincing visual appearance. The second welding process during Smooth Welding evens the connecting welding seam – an elaborate concept for a brilliant look without compromises to stability.
MERIDA’s premium alloy represents extremely durable and light aluminium of high-end quality. Triple-butted wall thicknesses result not only in exciting frame designs: First of all, they offer an optimum Stiffness-to-Weight (STW) ratio.
The mechanical TFS process works from the outside to the inside. In contrast, the complex Hydroforming concept shapes the frame by pushing hot oil under hydraulic high pressure from the inside to the outside. Material: Prolite 66 aluminium.
The friction-free alignment of the brake calliper is considerably eased by direct mounting of the post-mount calliper at the rear dropout. Adaptable to different brake disc sizes thanks to the utilization of differently dimensioned adapters.