eONE-FORTY EQ

Frame Size	S	M	L	XL	XXL
Tyre Sizes	29/27.5"	29/27.5"	29/27.5"	29/27.5"	29/27.5"
Frame Size CM	41	42	43	45	47
ST seat tube [mm]	405	415	430	450	470
TT top tube [mm]	561	581	603	624	645
CS chain stay length [mm]	439.5	439.5	439.5	439.5	439.5
HTA head tube angle [°]	66.5	66.5	66.5	66.5	66.5
STA seat tube angle [°]	76.5	76.5	76.5	76.5	76.5
BD bottom bracked drop [mm]	25	25	25	25	25
HT head tube [mm]	110	115	120	125	130
FL fork length [mm]	551	551	551	551	551
R reach [mm]	410	430	450	469	489
S stack [mm]	622	627	631	635	640
WB wheel base [mm]	1160	1182	1204	1226	1248
SH stand over height [mm]	729	730	727	733	747

Download PDF

No.	Item-No.	Name	Info	Pieces	Torque NM
1	2294001180	WASHER		2
2	2221002395	BEARING	3802V-2RS 24D15D7W	2
3	2300012662	BOLT		1
4	2300012673	SCREW		1	18
7	2035001617	S - LINK		1
8	2221002254	BEARING	6800V-2RS 19D10D5W	2
11	2221002265	BEARING	6801-2RS 21D12D5W	2
12	2300012695	SCREW		1	14
13	2300012684	BOLT		1
14	2294002255	WASHER		2
15	2294004826	WASHER		4
16	2221002328	BEARING	12214V-2RS 21D12D4W	8
17	2300015375	BOLT		4
18	2300015386	SCREW		4	14
19	2300005272	SCREW		1	5
20	2311005101	DROPOUT	DH – 057	1
21	2300010950	SCREW		2	4
22	2300011412	SCREW		2	4
23		SMART ENTRY		1
24	2300011810	SCREW		1	4
25	2161001671	COVER		1
26	2029000856	BUMPER		1
27	2161002133	ENERGY GUARD TWIST		1
28	2161002229	CABLE GUIDE		1
29	2298011283	SCREW		4	5
30	2300015751	SCREW		3	12
31	2300015762	SCREW		3	12
32	2258001133	CABLE GUIDE		1
33	2298002501	SCREW		1	5
34	2258003801	CABLE GUIDE		1
35	2258005814	CABLE GUIDE		1
36	2143002869	PLUG		1
37	2143003600	PLUG		1
38	2143003804	PLUG		1
39	2111001046	CABLE HOLDER		2
40	2143003923	ON / OFF BUTTON		1

HIGHLIGHTS

SHIMANO'S EP8

Comes equipped with the new EP8 motor from Shimano STePS. It offers an increased performance of 85 Nm, less weight, a further reduction in size and less friction. On top of that, the new internal battery offers an extended range and super-fast charging capabilities.

INTERNAL BLOCK

First introduced in 2015, the e-bike version of the 'Internal Block' is incorporated directly into the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

CLEVER WHEELS

To give the e-full suspension bikes precise steering, fantastic ‘rolling over obstacles’ behaviour yet maximum traction, we have combined a 29er front wheel with a 2.5" tyre and a 650B rear wheel, equipped with a slightly wider 2.6" tyre. The perfect combination of precision, playfulness and traction.

WATER CARRIER

Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles or accessories like a lock or pump to the frame to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.

CARBON OR ALUMINIUM

These models are available in two different frame options. A carbon front end combined with a 6061 aluminium rear end, or a more budget-friendly all-aluminium chassis.

Technologies

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.

INTERNAL BLOCK

First introduced in our 2015 NINETY-SIX, the new version of the 'Internal Block' is incorporated directly in the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

ENERGY GUARD TWIST

Twist lock mechanism that is located at the top end of the 'Energy Guard' battery cover, for easy locking and unlocking of the protective internal battery cover.

WATCH VIDEO ON YOUTUBE

eONE-FORTY EQ

Awards & Media

HIGHLIGHTS

Technologies

HFS - HYDRO FORMING SYSTEM

X-TAPER HEADTUBE

SMOOTH WELDING

INTERNAL CABLE ROUTING

SMART ENTRY

DI2 READY

RACELITE 61 ALUMINIUM

K-MOUNT

CASTING MOTOR BRACKET

INTERNAL BLOCK

ENERGY GUARD TWIST

eONE-FORTY COLLECTION

ONLY DOWNHILL-FUN IS SO YESTERDAY