BIG.TRAIL 200

BIG.TRAIL 200

 

TROUVER UN REVENDEUR
  • material: aluminium
  • 29x2.5" max. wheelsize
  • 148x12mm axle standard
  • BSA bottom bracket standard
Tailles S, M, L, XL, XXL
Couleur ORANGE (BLACK)
  • Coil
  • 120mm suspension travel
  • Lockout
  • 46mm fork offset
  • 29x2.4" max. wheelsize
Commande vitesse arr. Shimano Deore M4100
Pédalier 170 mm-S, 175 mm-M up
  • 32 teeth
  • 170 mm-S, 175 mm-M up
Chaine KMC X10
  • material: aluminium
  • 740mm width
  • 10mm rise
Poignée MERIDA COMP EC
  • material: aluminium
  • 31.8mm diameter
  • 7° stem angle
  • 50 mm all sizes
Direction MERIDA M2345
Selle MERIDA COMP CC
  • material: aluminium
  • 30.9mm diameter
  • 0mm setback
  • 29mm inner width
  • material: aluminium
  • Tubeless ready (tubeless tape and valves not included)
Rayons Black stainless
Chambre à air Ultralite-29
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 32 spoke holes
  • Centerlock
Pedale VP VPE-891
Hardware Stainless

weighed with 29" wheels and at frame size M, without pedals

Bike Frame Geometry Image
Frame Size S M L XL XXL
Tire Sizes 29" 29" 29" 29" 29"
St Seat Tubes Mm 380 410 430 450 470
Tt Top Tubes Mm 579 600 622 645 670
Cs Chain Stays Mm 435 435 435 435 435
Hta Head Tube Angles Deg 65.5 65.5 65.5 65.5 65.5
Sta Seat Tube Angle Deg 75.5 75.5 75.5 75.5 75.5
Bd Bottom Bracket Drops Mm 66.5 66.5 66.5 66.5 66.5
Ht Head Tube Lengths Mm 95 100 110 120 120
Fl Fork Lengths Mm 550 550 550 550 550
R Reachs Mm 415 435 455 475 500
S Stacks Mm 636 641 650 659 659
Wb Wheel Base Mm 1150 1172 1196 1220 1245
Sh Stand Over Height Mm 716 723 725 728 730

Category Highlights

While clearly a trail loving long-travel hardtail, our new BIG.TRAIL also offers built-in versatility through hidden rack, fender and kick stand mounts in case you like to turn the BIG.TRAIL into a ‘SUV’ commuter. 

Ability to fit two water bottles into the frame without making the bottles difficult to reach. Perfect for long marathon races and extended trail sessions.

Our BIG.TRAIL rolls on 29er wheels and has tyre clearance for up go 2.5" trail tyres. The combination of 29er wheels and 2.5" tyres offer plenty or corner and climbing grip, while the big tyre volume and the 29er 'rolling over ability' give our trail hardtail extra comfort and stability.

The new 'Trail Mount' is positioned underneath the top tube/seat tube junction and these ingenious fixing points makes fitting an additional tool or a pump a breeze. The 'Trail Mount' offers a real advantage if you prefer to keep the weight off your back or if you are heading out for an extra-long outing where you might need to carry additional gear.

Les câbles sont acheminés en interne, donnant un aspect propre au cadre et protégeant les câbles de l'encrassement et de l'eau.

A long reach, paired with a slack 65.5° head angle and a steep seat angle make our BIG.TRAIL a solid descender even when the trail is littered with roots and rocks, while maintaining impressive climbing abilities, due to the central seating position over the bottom bracket. The extra short seat tube and low stand over hight help to create lots of space to manoeuvre the bike when the trail gets demanding but also allow for long travel dropper posts.

Tous les modèles de notre gamme NINETY- SIX disposent d'un arrière équipé du Boost-standard. Le large axe de 148 mm permet un angle de rayon plus plat dont résulte une meilleure rigidité et une roue plus forte, particulièrement bénéfique pour les 29".

Technologies

IMAGE
Back to overview

X-TAPER HEADTUBE

L'utilisation d'un tube de direction conique long de 1 1/8'' sur le dessus et de 1 .'' ou 1 ó '' sur la partie inférieure assure une rigidité maximale ainsi qu'une direction précise et de confiance.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

La méthode de double soudage comprend un deuxième passage sur la soudure pour lisser la surface et donner un bon aspect visuel. Au premier regard, le cadre en aluminium ressemble à un cadre en carbone.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

Les câbles sont acheminés à travers le cadre, entrant et sortant par le biais de prises spéciales. Le vélo semble épuré et les câbles sont protégés contre l'humidité et la saleté.

Watch Video
IMAGE
Back to overview

DOWN TUBE EXIT

Cette technique assure que les câbles et les gaines puissent se déplacer librement sans provoquer aucun problème, tout en permettant un accès facile au pédalier pour l'entretien.

Watch Video
IMAGE
Back to overview

RACELITE 61 ALUMINIUM

L'aluminium 61 est notre exigence minimale. Plus léger, il permet d'en faire un cadre plus avancé. Un traitement à chaud et des tubes ajustés, produisent un cadre léger et rigide.

Watch Video
IMAGE
Back to overview

TFS - TECHNO FORMING SYSTEM

Le technoforming est un procédé mécanique qui utilise des moules creux et des noyaux de métal.

Watch Video
IMAGE
Back to overview

F-MOUNT

Les vélos équipés du "F-Mount" sont dotés de points d'attache intégrés pour y fixer un garde-boue rapidement et facilement (certains vélos exigent un modèle de garde-boue spécifique).

Watch Video
IMAGE
Back to overview

K-MOUNT DROP-OUT

Base de montage intégrée sur le montant de la chaine pour y fixer une béquille latérale MERIDA.

Watch Video
IMAGE
Back to overview

C-MOUNT

Les vélos équipés du "C-Mount" sont dotés de points d'attache pour y fixer un porte- bagages de manière rapide, facile et fiable (certains vélos exigent un modèle de porte-bagages spécifique).

Watch Video