LITHOS 10K

 

The ultimate enduro e-MTB. Refined handling and chaos-taming suspension in a flawless package. Designed for riders who want the very best components money can buy on a reliable, tough and versatile machine that's ready for racing and riding.
Trova un rivenditore

The LITHOS 10K is our ultimate enduro e-MTB. Our carbon fibre frame keeps mass low for refined handling, along with a new geometry that maximises traction and control on the toughest, roughest trails. With the lightweight but hugely powerful Bosch CX-R drive unit and a high-capacity 800 Wh battery, it's got the power to tackle big mountain adventures and multi-stage race tracks, while the smart Fox DHX Live Valve NEO coil-sprung rear shock automatically adjusts damping support for speed and efficiency. Up front, there's a buttery smooth inverted Fox Podium fork, while bulletproof DT Swiss carbon wheels and SRAM's wireless X0 Eagle drivetrain round out a dream spec.

Even in the most imposing terrain, it is possible to find flow. Named after the Ancient Greek for rock or stone, the LITHOS is designed for serious enduro riders and racers, with a single-minded focus on speed, no matter what turn the trail takes.

With a full carbon frame and 170 mm of travel at either end, it’s built for the toughest tracks, pushing hard with friends and racing against the clock. The handling has been engineered to help you carry speed, no matter what the gradient or ground. The geometry is made to maximise traction on flat turns and confidence on steep sections with a longer chainstay and higher stack, while travel-adjustable dropper posts and our AGILOMETER sizing mean you can fine-tune fit and handling.

Because you need absolute faith in your setup for flat-out technical riding, we doubled down on versatility, durability and reliability when creating the LITHOS. That’s why we use the latest Bosch CX and CX Race drive units plus 600 and 800 Wh batteries, giving big-brand performance with proven worldwide sales support.

You can run a lightweight 600 Wh battery for agile handling or a high-capacity 800 Wh for the big days, plus it’s possible to route the cables cleanly through our WIRE PORT or semi-externally via headtube ports if you need rapid access. We also give the choice of running a full 29” setup for flat-out speed or the standard mixed 29/27.5” setup to retain plenty of agility, while both air and coil rear shocks will work perfectly.

  • Lightweight carbon fibre CF3 frame with 170/174 mm travel
  • Mixed 29/27.5" size wheel setup as standard can be swapped to full 29"
  • Lightweight Bosch CX-R drive unit with 120 Nm torque and 800 Wh removable battery
  • Fox Podium inverted fork, DHX Live Valve NEO coil shock and wireless SRAM X0 Eagle drivetrain
  • Carbon fibre rimmed DT HXC 1500 wheelset with DEG DF and Continental Kryptotal tyres
  • Lifetime frame warranty for Category 4 All Mountain (AM) + Enduro use
  • material: carbon
  • 174mm suspension travel
  • 29" x 2,4" max. wheelsize
  • 148x12mm axle standard
  • removable battery
COLORE GREY TO WILD HONEY (HOLO HONEY)
MISURA TELAIO Mid, Long
  • 170mm suspension travel
  • tapered
  • 44mm fork offset
  • 29x2.6" max wheelsize
AMMORTIZZATORE Fox Float DHX Factory Live Valve Neo w/SLS Coil
  • 220mm
  • 200mm
SERIE STERZO Acros ICR MERIDA INTEGRATED neck w/ Blocklock
  • material: aluminium
  • 35mm diameter
  • 0° stem angle
  • Supernova mount
  • 40 mm
MANOPOLE MERIDA EXPERT TR
CAMBIO Sram X0 Eagle Transmission AXS
COMANDI Sram dropper lever MMX / Sram AXS Pod Controller
GUARNITURA Sram XO Eagle E-MTB Crank, 160mm all sizes
  • 34.9mm diameter
  • 0mm setback
  • all sizes 30-230mm travel seatpost
MORS. REGGISELLA MERIDA EXPERT
  • V-mount adapter
  • incl. MERIDA minitool
PEDALI VP VP-532
  • including removeable lever, 6/4mm allen key
  • 110x20mm width front hub
  • 148x12mm width rear hub
  • 30mm inner width
  • 6-Bolt
  • SRAM XD
  • material: carbon
  • Tubeless ready (tubeless tape and valves included)
  • 29x2.4"
  • fold
  • TR
  • Enduro casing
  • Super soft compund
  • 27.5x2.4"
  • fold
  • Enduro casing, soft compound
PARAFANGHI RF-001 mini fender
SERRATURA BATTERIA Abus Key
MOTORE Bosch Performance Line CX-R
DISPLAY Bosch Kiox 400C
PESO COMPLESSIVO CONSENTITO 140 kg
Immagine geometrie telaio
Misura telaio Mid Long
Misura pneumatici 29/27.5" 29/27.5"
St reggisella mm. 425 445
Tt top tube mm. 593 621
CS Carro posteriore Mm 447 447
Hta Gradi angolo sterzo 64 64
Sta Gradi angolo tubo piantone 78.5 78.5
Bd Movimento centrale mm. 10 10
Ht Altezza tubo sterzo mm. 120 130
FI Lunghezza forcella mm. 586 586
Fo offset forcella 44 44
R Reachs Mm 460 485
S Stacks Mm 646 655
Wb interasse mm 1259 1289
Sh Stand Over Height Mm 762 765
Immagine geometrie telaio
Numero Codice articolo Nome Info Pezzi Coppia NM
1 A2300000729 BOLT M6x1 OD15/17mm L69mm 1
2 A2221000040 BEARING 172607V-2RS OD26mm ID17mm W7mm 1
3 A2294000102 WASHER OD21mm ID17.1mm H3mm 1
4 A2294000016 WASHER OD19mm ID15.1mm H3mm 3
5 A2221000043 BEARING 3802V-2RS OD24mm ID15mm W7mm 3
6 A2300000609 SCREW M10x1 L15mm 1 15~17
7 A2300000736 BOLT M6x1 OD10mm L39mm 1
8 A2298000113 SCREW M6x1 L16mm 2 8~10
9 A2294000196 WASHER for M6 sunkenhead screw OD16mm 2
10 A2300000693 BOLT M6x1 OD12mm L62mm 1
11 A2300000737 SCREW M8x1 L49mm 1 18~20
12 A2294000224 LOCK RING for ID21 1
13 A2294000223 WASHER OD15.5mm ID12.1mm H3mm 2
14 A2221000035 BEARING 6801V-2RS OD21mm ID12mm W5mm 2
15 A2031000100 LINK 1
16 A2262000059 WASHER OD15.5mm ID12.1mm H31mm 1
17 A2300000743 SCREW M15x1 L20.5mm 2 23~25
18 A2294000225 LOCK RING for ID24 2
19 A2302000109 NUT M15x1 flipchip 2
20 A2292000141 WASHER OD13mm ID9mm H1mm 1
Immagine geometrie telaio
Numero Codice articolo Nome Info Pezzi Coppia NM
1 A9069000063 BOSCH OEM PART BHU3500 DISPLAY PURION 400 1
2 A2300000702 BOSCH OEM PART SCREW FOR CLAMP PURION 400 1
3 A2298000160 SCREW M4x0.7 L10mm 10
4 A2158000112 PROTECTOR for right chain stay 1
5 A2263000105 PROTECTOR for motor 1
6 Bosch CX BDU38 1
7 A2311000149 RD-HANGER UDH 1
8 A2002000135 THRU AXLE EXPERT TR; L=178.5mm M12x1 TL=13.5mm 1
9 A2258000187 MOUNT Bosch Mount for speed sensor 1
10 A2302000102 NUT Bosch Motor Nut 1
11 A2158000113 PROTECTOR for left chain stay 1
12 A2262000071 BOSCH OEM PART Sleeve Narrow 1
13 A2262000072 BOSCH OEM PART Sleeve Wide 1
14 A2300000765 BOSCH OEM PART Bolt Narrow 1 29~30
15 A2300000766 BOSCH OEM PART Bolt Wide 1 29~30
16 A2263000062 MOUNT for charging port 1
17 A2116000284 FENDER 2
18 A2143000160 CABLE PLUG for speed sensor/Di2 cable 3
19 A2302000116 NUT for Bosch Motor Mount 2
20 A2298000092 SCREW M5*P0.8 L20mm 1 6~8
21 A2116000283 FENDER Long Performance Fender 2
22 A2298000071 SCREW M5x0.8 L15mm 1 6~8
23 BOSCH OEM PART Lower battery mount 1
24 BOSCH OEM PART Upper battery mount 1
25 BOSCH OEM PART battery 1
26 BOSCH OEM PART Wide Adapter 1
27 A2263000067 COVER for battery 1
27 A2263000102 COVER for battery (800Wh) 1
28 A2263000071 COVER MOUNT Fidlock Pinlock vertical Male 1
29 A2030000033 MOUNT 1
30 A2263000070 COVER MOUNT Fidlock Pinlock vertical Female 4
31 A2300000318 SCREW M4x0.7 L12mm 1 3~5
32 A2161000217 MOUNT for tube/accesoires 1
33 A2300000612 SCREW M8x1.25 L6mm 1 10~12
34 A2143000120 PROTECTOR Key hole protector 1
35 A2258000270 CABLE GUIDE Right side 1
36 A2258000271 CABLE GUIDE Left side 2
37 A2298000475 SCREW M3*P0.5 L10mm 2 3~5
38 A2294000246 MOUNT for battery 4
39 A2300000168 SCREW M5*P0.8 L14mm 6 4~5
40 A2294000167 WASHER OD12mm ID6.4mm H0.5mm 1
41 A2232000030 MOUNT Mount for chain guide 1
42 A2300000485 SCREW M4x0.7 L6mm 1 3~5
43 A2298000113 SCREW M6x1 L16mm 1 3~5
44 A2232000056 CHAIN GUIDE for 32T-38T 1
45 A2300000484 SCREW M4x0.7 L10mm 1 3~5
46 A2191000232 HEAD SET Acros AZA-717 1
47 A2143000153 BLIND PLUG for 14mm Hole 1

Per ridurre i tempi di produzione e consegna, a volte siamo costretti ad apportare modifiche alle specifiche dell'ultimo minuto. Tieni presente che tali modifiche potrebbero non riflettersi su queste pagine e immagini dei prodotti.